WE ARE HERE

When was the last time the roof of your building was inspected? If it’s been awhile, the roof may have problems lurking that need immediate attention. Some roof problems cause obvious signs such as for example leaks, while some produce subtle signs that are only detectable at first glance. In either case, leaving the issues unaddressed can cost you a small fortune when you finally repair them. If the roof on your own building has any of the problems listed below, a company that focuses on commercial roofing should repair them quickly:

Buckled Panels

Roof panels buckle due to weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow underneath the panels, making them loose. Because the problem worsens, the panels start to fall off, often coming off in large sections when a storm hits. Buckled panels are perhaps one of the most commonly fixed problems by companies that perform roof repair.

Roof Cleaning in Spalding

Expanded screw holes are another problem for panel roofs. As time passes, wind and fluctuating temperatures cause the screw holes in panels to widen round the screws that hold the panels set up. This creates an area where water can leak underneath the panels and soak the roof deck. Once the deck becomes saturated, the thing is costly to fix.

Blistering

Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose a problem, large ones can rupture and allow water to seep beneath the bitumen. Once the blisters form, hot weather typically makes them worse. Due to the humid subtropical climate in some regions of the united states, commercial roofing frequently experiences blistering.

Ponding Water

Blocked drains and improper sloping could cause water to gather in small ponds on a roof. Repairing a blocked drain is simple, but fixing a sloping problem is more technical. Often, installing a taper insulation system to establish a new slope is the best solution. Through the rainy season, resolving ponding water is one of the most common types of roof repair.

Loose Flashing

Flashing prevents water from seeping in the crevice where the roof abuts to protrusions such as chimneys and vents. As time passes, most flashing must be resealed. If it is not, leaks could cause serious damage the deck and building interior. Most flashing problems are corrected during scheduled maintenance.

Missing Mortar

Chimneys and high parts of brick walls that have parts of missing mortar could cause leaks. These leaks are often mistaken for leaks in the roof membrane, but a thorough inspection by way of a company that focuses on commercial roofing will reveal the real problem. Most parts of missing mortar can be repaired with basic tuck pointing procedures.

Conclusion

The problems above are a few of the most common reasons for roof repair. If they are corrected early, most problems are inexpensive to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is a good solution to ensure problems are detected early.